D-Link xStack DGS-3420 Series - Page 263

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
258
Restrictions
Only Administrator-level users can issue this command.
Example
To enable dhcpv6_client packet sending debug:
DGS-3420-28SC:admin# debug dhcpv6_client packet sending state enable
Command: debug dhcpv6_client packet sending state enable
Success.
DGS-3420-28SC:admin#
19-19 debug dhcpv6_relay state enable
Description
This command is used to enable the DHCPv6 relay Debug function.
Format
debug dhcpv6_relay state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled DHCPv6 relay debug function:
DGS-3420-28SC:admin# debug dhcpv6_relay state enable
Command: debug dhcpv6_relay state enable
Success.
DGS-3420-28SC:admin#