D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
305
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the address range of the DHCP address pool:
DGS-3420-28SC:admin#config dhcp pool network_addr nyknicks 10.10.10.0/24
Command: config dhcp pool network_addr nyknicks 10.10.10.0/24
Success.
DGS-3420-28SC:admin#
22-7 config dhcp pool domain_name
Description
This command is used to specify the domain name for the client if the server allocates the address for
the client from this pool. The domain name configured here will be used as the default domain name
by the client. By default, the domain name is empty. If the domain name is empty, the domain name
information will not be provided to the client.
Format
config dhcp pool domain_name <pool_name 12> {<domain_name 64>}
Parameters
<pool_name 12> - Specify the DHCP pool name.
<domain_name 64> - (Optional) Specify the domain name of the client.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the domain name option of the DHCP pool:
DGS-3420-28SC:admin#config dhcp pool domain_name nyknicks nba.com
Command: config dhcp pool domain_name nyknicks nba.com
Success.
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English