xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
306
22-8 config dhcp pool dns_server
Description
This command is used to specify the IP address of a DNS server that is available to a DHCP client. Up
to three IP addresses can be specified on one command line. If DNS server is not specified, the DNS
server information will not be provided to the client. If this command is input twice for the same pool,
the second command will overwrite the first command.
Format
config dhcp pool dns_server <pool_name 12> {<ipaddr> {<ipaddr> {<ipaddr>}}}
Parameters
<pool_name 12> - Specify the DHCP poll name.
<ipaddr> - (Optional) Specify the IP address of the DNS server. Up to three IP addresses can be
specified on one command line.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DNS server’s IP address:
DGS-3420-28SC:admin#config dhcp pool dns_server nyknicks 10.10.10.1
Command: config dhcp pool dns_server nyknicks 10.10.10.1
Success.
22-9 config dhcp pool netbios_name_server
Description
This command is used to specify the NetBIOS WINS server that is available to a Microsoft DHCP
client. Up to three IP addresses can be specified on one command line.
Windows Internet Naming Service (WINS) is a name resolution service that Microsoft DHCP clients
use to correlate host names to IP addresses within a general grouping of networks. If a NetBIOS name
server is not specified, the NetBIOS name server information will not be provided to the client. If this
command is input twice for the same pool, the second command will overwrite the first command.
Format
config dhcp pool netbios_name_server <pool_name 12> {<ipaddr> {<ipaddr> {<ipaddr>}}}
To Next Page
Loading...
Need help?
General