D-Link xStack DGS-3420 Series - Page 344

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
339
Restrictions
None.
Example
To display filter DHCPv6 server information:
DGS-3420-28SC:admin#show filter dhcpv6_server
Command: show filter dhcpv6_server
Enabled ports:1:1-1:8
Trap State: Enabled
Log State: Enabled
Permit Source Address Table:
Source IP Address Port
--------------------------------------- ---------------
2200::5 1:5
Total Entries:1
DGS-3420-28SC:admin#
23-10 delete filter dhcpv6_server permit sip
Description
This command is used to delete a filter DHCPv6 server permit entry.
Format
delete filter dhcpv6_server permit sip <ipv6addr>
Parameters
<ipv6addr> - Enter the source IPv6 address of the entry here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete permit entry from the filter DHCPv6 server forward list:
DGS-3420-28SC:admin#delete filter dhcpv6_server permit sip 2200::4
Command: delete filter dhcpv6_server permit sip 2200::4