Fairings
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_5_2.20.1.html[11/12/2015 18:40:16]
Unscrew the special screws (9) and remove the rear tank cover (5).
Refitting the fuel tank fairings
Locate the rear cover (5) on the fuel tank and secure it in place with the special screws (9).
Tighten the two upper special screws (9) to a torque of 2 Nm ±10% (Sect. 3 - 3,
Frame torque settings).
Check that the four bushes (6) are installed on the front tank cover (3) with the larger diameter side facing upwards and
the six spacers (14) as shown.
To Next Page