Handlebar unit: Throttle twistgrip
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_7_8A.45.1.html[11/12/2015 18:40:32]
Remove the throttle cable (10) from the vehicle.
Remove the plug (2) from the handlebar.
Loosen the two screws (9) fixing the throttle twistgrip to handlebar.
Remove the throttle twistgrip (6) from the handlebar.
Refitting the throttle twistgrip
To refit the throttle control components, proceed in inverse order to the removal procedure, making sure that the twistgrip
housings locate in the reference hole in the handlebar.
Apply the recommended grease to the throttle cable (10).
Tighten the screws (9) to a torque of 6 Nm ±10% in the sequence 1-2-1 and the screws (8) to a torque of 1.8 Nm ±10%
(Sect. 3 - 3,
Frame torque settings).
To Next Page
Loading...
