Ducati Monster 796 - Disassembly of Gear Interlock Plunger and Pawl Assembly

Gearbox assembly: gearchange mechanism
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_7A.75.1.html[11/12/2015 18:40:50]
Disassembly of gear interlock plunger and pawl assembly
Operations Section reference
Drain the engine oil 4 - 3, Changing the engine oil and filter
cartridge
Disconnect the oil pressure
sensor
6 - 5,
Checking the indicating devices
Remove the clutch cover 9 - 6.2,
Removal of the clutch cover
Remove the clutch assembly 9 - 6.1,
Removal of the APTC clutch
Remove the oil pump 9 - 2.1,
Removal of the oil pump
Remove the clutch drum 9 - 6.3,
Removal of the primary drive
gear
Unscrew the interlock plunger screw (5) and remove the seal (6), the spring (7) and the detent ball (8).