Headlight fairing - rear-view mirrors
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_5_1.19.1.html[11/12/2015 18:40:16]
Refit the headlight fairing
Fit the brackets (5) to the headlight support, starting the screws (9) and nuts (6).
While holding the nuts (6), tighten the screws (9) (Sect. 3 - 3, Frame torque settings) as follows:
-tighten the lower screws (9) to a torque of 1.5 Nm ± 10%.
-tighten the upper screws (9) to a torque of 8 Nm ± 10%.
-tighten the lower screws (9) to a torque of 8 Nm ± 10%.
Refit the headlight fairing (8) starting and tightening the screws (7) to a torque of 5 Nm ±10% (Sect. 3 - 3, Frame torque
settings).
To Next Page
Loading...
