Seat
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_5_3.21.1.html[11/12/2015 18:40:17]
Removal of the tool tray
Remove the seat, as described in the paragraph “Removal of the seat“ of this section.
Release the elastic strap (9) and remove the tool bag (B) and free the ABS diagnosis connector (C) and the ABS diagnosis
power supply connector (D) in the ABS version.
Unscrew the screws (3) and remove the tool tray (4).
Refitting the tool tray
Refit the tool tray (4) starting the screws (3) and tighten them to a torque of 5 Nm ±10% (Sect. 3 - 3, Frame torque
settings).
To Next Page