Fuel tank
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_8_2.58.1.html[11/12/2015 18:40:39]
Refitting the fuel tank flange
Insert the flange (23) in its housing in the fuel tank.
Fit the four screws (28) with threadlocker and tighten them to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame torque
settings).
Fit the two screws (22) with the recommended threadlocker with the side that presents the threadlocker applied toward
the flange and tighten them to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame torque settings).
Refitting the fuel tank
If the fuel tank has been disassembled into its component parts, reposition all the parts as shown in the exploded view.
In particular:
tighten the screws (10) to a torque of 8 Nm ±10% and the screws (17) to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame
torque settings).
To Next Page