Evaporative emissions canister
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_8_10.62.1.html[11/12/2015 18:40:42]
Remove the evaporative emissions canister (9) from the LH deflector (4) by releasing it from the plate (6).
Refitting the evaporative emissions canister
Refitting is the reverse of removal.
In particular the plate (6) that supports the canister from the LH deflector (4) was removed, refit it with the
corresponding elements, tightening the nuts (8) to a torque of 8 Nm ±10% (Sect. 3-3,
Frame torque settings).
Tighten the screws (B) to a torque of 8 Nm ±10% (Sect. 3 - 3, Frame torque settings).
To Next Page
Loading...
