Frame inspection
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_7_17.55.1.html[11/12/2015 18:40:37]
Refit the rear subframe to the crankcase (Sect. 9 - 1, Refitting the engine).
Reconnect all the electrical parts connectors on subframe (Sect. 6 - 1,
Routing of wiring on frame), and refit the silencers
(Sect. 8 - 8,
Removal of the exhaust system).
Refitting the rear subframe
Locate the complete rear subframe assembly on the engine, apply the recommended grease to the threads of the pin (13)
and the nut (3).
Tighten the nut (3) to a torque of 60 Nm ±5% (Sect. 3 - 3,
Frame torque settings) while holding the screw (13).
H
To Next Page