Frame inspection
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_7_17.55.1.html[11/12/2015 18:40:37]
Check that the rubber buffer (B), rubber bushes (17) and spacers (16) are installed on the bracket (15).
Refit the bracket (15) to the rear subframe with screws (12).
While holding the nuts (11), present only on the left-hand side, tighten the screws (12) to a torque of 22 Nm ±10%
(Sect. 3 - 3,
Frame torque settings) in the sequence below: 5-6-7-8.
To Next Page