Gearbox assembly: gearchange mechanism
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_7A.75.1.html[11/12/2015 18:40:50]
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.
Removal of the gear selector lever
Operations Section reference
Drain the engine oil 4 - 3, Changing the engine oil and
filter cartridge
Remove the gearchange control 7 - 9,
Removal of the gearchange
control
Remove the clutch transmission
unit
7 - 8.2,
Removal of the clutch
transmission unit
Remove the front sprocket 7 - 14,
Removing of the front
sprocket
Remove the generator cover and
flywheel-generator assembly
9 - 8,
Flywheel - alternator
Undo the gear selector mechanism (21) retaining screws (18) and (20).
Remove screws (18) and (20), spacer (19) and withdraw the gear selector mechanism complete with the gear lever shaft,
spring and plate.
Important
Visually inspect the gear selector claw (14) for wear, particularly around the area where it contacts the selector drum.
Disassembly of the gear selector lever
If it is necessary to renew any components, disassemble the gearchange mechanism as shown in the exploded view.
To Next Page
Loading...
