Evaporative emissions canister
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_8_10.62.1.html[11/12/2015 18:40:42]
Evaporative emissions canister system (USA versions only)
USA models are equipped with an additional system with an evaporative emissions canister that prevents fuel fumes from
being discharged into the atmosphere.
The hose (12) is connected to the evaporative emissions canister (9); when the fuel has been filtered, it is returned with
the hose (14) to the intake manifolds via the hoses (16) and (14). Hoses (5) and (25) vent to the ground.
For correct positioning of the connection hoses see the pictures below.
Removal of the evaporative emissions canister
Operations Section reference
Remove the seat 5 - 3, Removal of the seat
Remove the tank covers 5 - 2,
Removal of the fuel tank
fairings
Raise the fuel tank 8 - 2,
Removal of the fuel tank
Disconnect the hose (12) connecting the evaporative emissions canister (9) to the fuel filler cap.
Release the hose (12) from the drain hose (20) by removing the strap (A).
To Next Page