Ducati Monster 796 - 1 Vehicle Pre-Delivery

Vehicle pre-delivery
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_4_1.15.1.html[11/12/2015 18:40:13]
1 -Vehicle pre-delivery
1 Check the condition of the shipping packaging (if present):
2 Remove from shipping packaging (if present);
3 Check the condition of the motorcycle:
4 Make sure the kit supplied is complete (use the list enclosed to the motorcycle packaging);
5 Installation of the kit supplied, following the instructions enclosed to the vehicle;
6 Only if motorcycle is inside a crate;
7 Installation of accessories according to Customer's order and check if they work;
8 Setting the battery and installation on the vehicle;
9 Check tyre pressure:
- Front: 2.25 bar;
- Rear: 2.5 bar;
10 Check brake and clutch fluid level (top up, if necessary);
11 Check engine oil level (top up, if necessary);
12 Check if the lights, the turn indicators and the horn are working correctly; Check the height of the headlight beam;
13 Make sure the active and passive keys are working, as well as the steering lock to the right and to the left;
14 Check if the throttle control is working;
15 Check the tightening torque of the front and rear wheel shafts (Front: 63 Nm±5% - Rear LH: 156±5% - Rear RH:
176±5%);
16 Check the tightening torque of the brake calliper retaining screws (Front 45 Nm±5% - Rear 25 Nm±5%);
17 Top-up with fuel until reserve light switching off (approx. 3.5 liters);
18 Make sure that the engine stop switch and the side stand switch are working correctly;
19 Final inspection and road test (check ABS activation, if present);
20 Clean the vehicle;
21 Fill in the on-board documentation (warranty card);