Lights and indicating devices
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_4.28.1.html[11/12/2015 18:40:22]
Release the headlight from the front light assembly by unscrewing the screws (3).
Remove the front turn indicators (4) by removing the circlip (5) and unscrewing the screw (6).
Note
The US version fits a spacer (T) between turn indicator and headlight mount.
Refitting is the reverse of removal: if removed, refit the rubber blocks (7) to headlight finger-tight, apply a drop of clear
universal silicone onto rubber block (7) where indicated.
Duly install the safety washers (8) onto rubber block.
Note
Ensure the two safety washers are perfectly glued onto rubber block and can not come off.
To Next Page