Instruments
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_7.31.1.html[11/12/2015 18:40:23]
switch in position B “t”, the number increases cyclically in steps of one digit every second;
if you press the switch in position A “s”, you can set the third digit, which will start flashing. Each time you press the
switch in position B “t”, the number increases cyclically in steps of one digit every second;
if you press the switch in position A “s”, you can set the fourth digit, which will start flashing. Each time you press the
switch in position B “t”, the number increases cyclically in steps of one digit every second;
if you press the switch in position A “s”, you can set the fifth digit, which will start flashing. Each time you press the
switch in position B “t”, the number increases cyclically in steps of one digit every second;
press in position A “s” to confirm the code.
If the code entered is incorrect, the instrument panel will automatically return to the “CODE” menu and display the
code “00000”.
If the code has been entered correctly, the message CODE and the code itself will flash simultaneously for 4 seconds.
The EOBD diagnostics warning light (8) will go off. The instrument panel then automatically exits the menu, thus
temporarily allowing the motorcycle to be started.
To Next Page
Loading...
