Rear swingarm
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_7_13.51.1.html[11/12/2015 18:40:35]
Refit the upper chain slider (7) to the swingarm starting the screws (9) in their thread.
Tighten the screws (9) to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame torque settings) in the mentioned sequence.
Fasten the rear brake hose and the speed sensor wiring to swingarm (4) installing the lower chain slider (8), the upper
protection (13) and lower protection (12), and starting the screws (9) in their thread.
Tighten the screws (9) to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame torque settings) in the mentioned sequence.
To Next Page