Cylinder head assemblies: valves - rocker arms
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_4D.70.1.html[11/12/2015 18:40:46]
Screw tool 88713.2837 on the threaded end of the opening rocker arm shaft (4).
Slide out the rocker arm shaft (4) and recover the opening rocker arm (3) and the two shims (2).
Using a screwdriver, hold the closing rocker arm (18) in the valve open position:
Slide the valve closing shim (8) along the intake valve stem (17) in such a way as to make it possible to remove the two
half rings (7) securing the valve.
Use long nosed pliers or a magnetic screwdriver to remove the half rings (7) from the valve stem.
Slide the valve closing shim (8) off the valve (17).
Withdraw the valve (17) from the underside of the cylinder head.
To Next Page