Cylinder head assemblies: valves - rocker arms
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_4D.70.1.html[11/12/2015 18:40:46]
Refitting of the rocker arms, shims and valves
Fit the closing rocker arm (18) and relative spring (9) on service tool no. 88713.2783.
Insert the tool-rocker-spring assembly in the cylinder head and fit shaft (4) with a new washer (5), duly lubricated.
Important
When assembling the rocker arm shafts (4) make sure that threaded hole is on the external side of the cylinder head.
To Next Page
Loading...
