Gearbox assembly: gearbox shafts
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_7B.76.1.html[11/12/2015 18:40:50]
Slide the washer with three internal points (6) over the shaft until it locates against the circlip you have just fitted.
To fit the needle roller cage (4) onto the shaft, first lubricate it with plenty of grease (of recommended type) and then
open it slightly to make it easier to slide on to the shaft.
Fit the 3
rd
speed gear (22).
Fit on the gear the three-pointed washer (12), which can be distinguished from its counterpart (6) by its bigger outside
diameter.
To Next Page