Chapter 4
| System Management Commands
File Management
– 108 –
Command Mode
Privileged Exec
Command Usage
If you enter the command
dir
without any parameters, the system displays all files.
File information is shown below:
Example
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modified Time Size (bytes)
------------------------------ ------- ------- ------------------- ------------
Unit 1:
ECS2100_V1.1.2.10.bix OpCode N 2016-08-25 11:21:47 8085768
ECS2100_V1.1.10.171.bix OpCode Y 2016-08-05 05:38:37 8593672
Factory_Default_Config.cfg Config N 2016-08-05 05:32:24 477
startup1.cfg Config N 2016-08-03 09:18:32 961
startup2.cfg Config Y 2016-11-24 04:11:10 920
-------------------------------------------------------------------------------
Free space for compressed user config files: 16244736
Total space: 32 MB
Console#
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Table 17: File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Modify Time The date and time the file was last modified.
Size The length of the file in bytes.
To Next Page
Loading...
Need help?
General