Chapter 8
| Authentication Commands
Telnet Server
– 232 –
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
ip telnet server
This command allows this device to be monitored or configured from Telnet. Use
the
no
form to disable this function.
Syntax
[
no
]
ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#
telnet
(client) This command accesses a remote device using a Telnet connection.
Syntax
telnet
host
host - IP address or alias of a remote device.
Command Mode
Privileged Exec
Example
Console#telnet 192.168.2.254
Connect To 192.168.2.254...
***************************************************************
WARNING - MONITORED ACTIONS AND ACCESSES
User Access Verification
Username:
Console(config)#
To Next Page
Loading...
Need help?
General