Chapter 7
| Flow Sampling Commands
– 197 –
The following command removes a sampling data source from Ethernet interface
1/1.
Console# no sflow sampling interface ethernet 1/1 instance 1
Console#
show sflow
This command shows the global and interface settings for the sFlow process.
Syntax
show sflow
[
owner
owner-name |
interface
interface]
owner-name - The associated receiver, to which the samples are sent.
(Range: 1-30 alphanumeric characters)
interface
ethernet
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
Command Mode
Privileged Exec
Example
Console#show sflow interface ethernet 1/2
Receiver Owner Name : stat1
Receiver Timeout : 99633 sec
Receiver Destination : 192.168.32.32
Receiver Socket Port : 6343
Maximum Datagram Size : 1400 bytes
Datagram Version : 4
Data Source : Eth 1/2
Sampling Instance ID : 1
Sampling Rate : 512
Maximum Header Size : 128 bytes
Console#
To Next Page
Loading...
Need help?
General