Chapter 23
| Multicast Filtering Commands
MLD Filtering and Throttling
– 601 –
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld max-groups action replace
Console(config-if)#
ipv6 mld query-drop
This command drops any received MLD query packets. Use the no form to restore
the default setting.
Syntax
[
no
]
ipv6 mld query-drop
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command can be used to drop any query packets received on the specified
interface. If this switch is acting as a Querier, this prevents it from being affected by
messages received from another Querier.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld query-drop
Console(config-if)#
show ipv6 mld filter
This command displays the global and interface settings for MLD filtering.
Syntax
show ipv6 mld filter
[
interface
interface]
interface
ethernet
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel
channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General