Edge-Core ECS2100-28T - Show Ipv6 Mld Profile; Show Ipv6 Mld Query-Drop

Chapter 23 | Multicast Filtering Commands
MLD Filtering and Throttling
– 602 –
Example
Console#show ipv6 mld filter
MLD filter Enabled
Console#show ipv6 mld filter interface ethernet 1/3
Ethernet 1/3 information
---------------------------------
MLD Profile 19
Deny
Range ff01::101 ff01::faa
Console#
show ipv6 mld profile This command displays MLD filtering profiles created on the switch.
Syntax
show ipv6 mld profile [profile-number]
profile-number - An existing MLD filter profile number.
(Range: 1-4294967295)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ipv6 mld profile
MLD Profile 19
MLD Profile 50
Console#show ipv6 mld profile 19
MLD Profile 19
Deny
Range ff01::101 ff01::faa
Console#
show ipv6 mld
query-drop
This command shows if the specified interface is configured to drop MLD query
packets.
Syntax
show ipv6 mld query-drop interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-8)