Chapter 13
| Power over Ethernet Commands
– 400 –
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline time-range rd
Console(config-if)#
Related Commands
time-range (149)
show power inline
status
This command displays the current power status for all ports or for specific ports.
Syntax
show power inline status
[interface]
interface
ethernet
unit - Unit identifier. (Range: 1)
port - Port number. (Ethernet ports 1-8/24)
Command Mode
Privileged Exec
Example
Console#show power inline status
Unit: 1
Compatible Mode : Disabled
Maximum Allocation Mode : User mode
Time Max Used
Interface Admin Range Oper Class Power Power Priority
--------- -------- -------- ---- ----- -------- -------- --------
Eth 1/ 1 Enabled -- Off - 3360 mW 0 mW Low
Eth 1/ 2 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 3 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 4 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 5 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 6 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 7 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 8 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/ 9 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/10 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/11 Enabled -- Off - 33600 mW 0 mW Low
Eth 1/12 Enabled -- Off - 33600 mW 0 mW Low
.
.
.
To Next Page
Loading...
Need help?
General