Edge-Core ECS2100-28T - Authorization Commands

Chapter 8 | Authentication Commands
AAA
– 223 –
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
authorization
commands
This command applies an authorization method to entered CLI commands. Use the
no form to disable authorization for entered CLI commands.
Syntax
authorization commands level { default | list-name}
no authorization commands level
level - The privilege level for executing commands. (Range: 0-15)
default - Specifies the default method list created with the aaa
authorization commands command.
list-name - Specifies a method list created with the aaa authorization
commands command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization commands 15 default
Console(config-line)#