Edge-Core ECS2100-28T Reference Guide

Chapter 8 | Authentication Commands
AAA
– 224 –
authorization exec This command applies an authorization method to local console, Telnet or SSH
connections. Use the
no form to disable authorization on the line.
Syntax
authorization exec { default | list-name}
no authorization exec
default
- Specifies the default method list created with the aaa
authorization exec command.
list-name - Specifies a method list created with the aaa authorization exec
command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#
show accounting This command displays the current accounting settings per function and per port.
Syntax
show accounting [ commands [level]] |
[[
dot1x [ statistics [ username user - name | interface interface]] |
exec [ statistics ] | statistics ]
commands - Displays command accounting information.
level - Displays command accounting information for a specifiable
command level.
dot1x - Displays dot1x accounting information.
exec - Displays Exec accounting records.
statistics - Displays accounting records.
user
- name - Displays accounting records for a specifiable username.

Edge-Core ECS2100-28T Specifications

General

Brand	Edge-Core
Model	ECS2100-28T
Category	Switch
Language	English