Chapter 10
| Access Control Lists
ACL Information
– 347 –
clear access-list
hardware counters
This command clears the hit counter for the rules in all ACLs, or for the rules in a
specified ACL.
Syntax
clear access-list hardware counters
[
direction
in
[
interface
interface]] |
[
interface
interface] | [
name
acl-name]
in
– Clears counter for ingress rules.
interface
ethernet
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#clear access-list hardware counters
Console#
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console#show access-group
Interface ethernet 1/2
IP access-list david
MAC access-list jerry
Console#
To Next Page
Loading...
Need help?
General