Chapter 18
| Spanning Tree Commands
– 458 –
show spanning-tree
mst configuration
This command shows the configuration of the multiple spanning tree.
Command Mode
Privileged Exec
Example
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration Name : R&D
Revision Level :0
Instance VLANs
--------------------------------------------------------------
0 1-4094
Console#
show spanning-tree
tc-prop
This command shows the configuration of topology change propagation domains.
Syntax
show spanning-tree
tc-prop [group
group-id]
group-id - Group identifier. (Range: 1-255)
Command Mode
Privileged Exec
Example
Console#show spanning-tree tc-prop group 1
Group 1
Eth 1/ 1, Eth 1/ 2, Eth 1/ 3, Eth 1/ 4, Eth 1/ 5
Console#
To Next Page
Loading...
Need help?
General