Chapter 4
| System Management Commands
System Status
– 90 –
1 0 9 64 64 0 Reserved
1 0 10 64 64 0 C
1 0 11 64 64 0 C L
1 0 12 64 0 64 AE6S AE6E
1 0 13 128 0 128 AE4
1 0 14 128 0 128 AEM
1 0 15 64 0 64 DE6S DE6E
1 0 16 128 0 128 DE4
1 0 17 128 0 128 DEM QINQ
Console#
This command Example
show memory
This command shows memory utilization parameters, and alarm thresholds.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command shows the amount of memory currently free for use, the amount of
memory allocated to active processes, the total amount of system memory, and the
alarm thresholds.
Example
Console#show memory
Status Bytes %
------ ---------- ---
Free 111706112 41
Used 156729344 59
Total 268435456
Alarm Configuration
Rising Threshold : 95%
Falling Threshold : 90%
Table 11: show access-list tcam-utilization - display description
Field Description
Pool Capability Code Abbreviation for processes shown in the TCAM List.
Unit Stack unit identifier.
Device Memory chip used for indicated pools.
Pool Rule slice (or call group). Each slice has a fixed number of rules that are
used for the specified features.
Total The maximum number of policy control entries allocated to the each
pool.
Used The number of policy control entries used by the operating system.
Free
The number of policy control entries available for use.
Capability The processes assigned to each pool.
To Next Page
Loading...
Need help?
General