Chapter 4
| System Management Commands
Time Range
– 150 –
Command Usage
â—†
This command sets a time range for use by other functions, such as Access
Control Lists.
â—†
A maximum of eight rules can be configured for a time range.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (325)
absolute
This command sets the absolute time range for the execution of a command. Use
the
no
form to remove a previously specified time.
Syntax
absolute start
hour minute day month year
[
end
hour minutes day month year]
absolute end
hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month -
january
|
february
|
march
|
april
|
may
|
june
|
july
|
august
|
september
|
october
|
november
|
december
year - Year (4-digit). (Range: 2013-2037)
Default Setting
None
Command Mode
Time Range Configuration
Command Usage
â—†
If a time range is already configured, you must use the
no
form of this
command to remove the current entry prior to configuring a new time range.
â—†
If both an absolute rule and one or more periodic rules are configured for the
same time range (i.e., named entry), that entry will only take effect if the current
time is within the absolute time range and one of the periodic time ranges.
To Next Page
Loading...
Need help?
General