Edge-Core ECS2100-28T Reference Guide

Chapter 23 | Multicast Filtering Commands
MLD Snooping
– 589 –
Command Usage
This command only clears entries learned though MLD snooping. Statically
configured multicast address are not cleared.
Example
Console#clear ipv6 mld snooping groups dynamic
Console#
clear ipv6 mld
snooping statistics
This command clears MLD snooping statistics.
Syntax
clear ipv6 mld snooping statistics [ interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-8)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear ipv6 mld snooping statistics
Console#
show ipv6
mld snooping
This command shows the current MLD Snooping configuration.
Syntax
show ipv6 mld snooping [ vlan [vlan-id]]
vlan-id - VLAN ID (1-4094)
Command Mode
Privileged Exec
Command Usage
This command displays global and VLAN-specific MLD snooping configuration
settings.

Edge-Core ECS2100-28T Specifications

General

Brand	Edge-Core
Model	ECS2100-28T
Category	Switch
Language	English