Chapter 13
| Power over Ethernet Commands
– 396 –
power mainpower
maximum allocation
This command defines a power budget for the switch (i.e., the power available to all
switch ports). Use the
no
form to restore the default setting.
Syntax
power mainpower maximum allocation
milliwatts
milliwatts - The power budget for the switch.
(Range: 50000-65000 mW for ECS2100-10PE,
50000-125000 mW for ECS2100-10P,
50000-200000 mW for ECS2100-28P,
50000-370000 mW for ECS2100-28PP without external power supply,
50000-740000 mW for ECS2100-28PP with external power supply)
Default Setting
65000 mW for ECS2100-10PE
125000 mW for ECS2100-10P
200000 mW for ECS2100-28P
370000 mW for ECS2100-28PP without external power supply
740000 mW for ECS2100-28PP with external power supply
Command Mode
Global Configuration
Command Usage
◆
Setting a maximum power budget for the switch enables power to be centrally
managed, preventing overload conditions at the power source.
◆
If the power demand from devices connected to the switch exceeds the power
budget setting, the switch uses port power priority settings to limit the
supplied power.
Example
Console(config)#power mainpower maximum allocation 180000
Console(config)#
Related Commands
power inline priority (398)
To Next Page
Loading...
