Chapter 25
| Domain Name Service Commands
Multicast DNS Commands
– 638 –
Command Mode
Global Configuration
Command Usage
Use this command to enable multicast DNS host name-to-address mapping on the
local network without the need for a dedicated DNS server. For more information
on this command refer to the Web Management Guide.
Example
Console(config)#ip mdns
Console(config)#
show ip mdns
This command displays the configuration state multicast DNS service.
Command Mode
Privileged Exec
Example
Console#show ip mdns
Multicast DNS Status : Enabled
Console#
To Next Page
Loading...
Need help?
General