Chapter 22
| Quality of Service Commands
– 542 –
Description:
Match ip dscp 10
Match access-list rd-access
Match ip dscp 0
Class Map match-any rd-class#2
Match ip precedence 5
Class Map match-any rd-class#3
Match vlan 1
Console#
show policy-map
This command displays the QoS policy maps which define classification criteria for
ingress or egress traffic, and may include policers for bandwidth limitations.
Syntax
show policy-map
[policy-map-name [
class
class-map-name]]
policy-map-name
- Name of the policy map. (Range: 1-32 characters)
class-map-name - Name of the class map. (Range: 1-32 characters)
Default Setting
Displays all policy maps and all classes.
Command Mode
Privileged Exec
Example
Console#show policy-map
Policy Map rd-policy
Description:
class rd-class
set PHB 3
class finance-class
police rate 100 class rd-class
Policy Map rd-policy
class rd-class
set PHB 3
Console#
To Next Page
Loading...
