Chapter 8
| Authentication Commands
Web Server
– 228 –
Example
Console(config)#ip http port 769
Console(config)#
Related Commands
ip http server (228)
show system (96)
ip http server
This command allows this device to be monitored or configured from a browser.
Use the
no
form to disable this function.
Syntax
[
no
]
ip http server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip http server
Console(config)#
Related Commands
ip http authentication (227)
show system (96)
ip http secure-port
This command specifies the TCP port number used for HTTPS connection to the
switch’s web interface. Use the
no
form to restore the default port.
Syntax
ip http secure-port
port_number
no ip http secure-port
port_number – The TCP port used for HTTPS. (Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
To Next Page
Loading...
Need help?
General