Chapter 4
| System Management Commands
System Status
– 98 –
Eth 1/ 5 Dowm 1 0 Auto-100full 1000BASE-T None
...
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a “*” symbol next to the
Line (i.e., session) index number.
Example
Console#show users
User Name Accounts:
User Name Privilege Public-Key
-------------------- ---------- ---------------
admin 15 None
guest 0 None
Online Users:
Line Session ID User Name Idle Time (h:m:s) Remote IP Addr
--------- ---------- -------------------- ----------------- -----------------
*Console 0 admin 0:00:01
Web Online Users:
Line User Name Idle Time (h:m:s) Remote IP Addr
---------- -------------------- -------------------- --------------------
Console#
show version
This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show version
Unit 1
Serial Number : S123456
Hardware Version : R01
Number of Ports : 28
Main Power Status : Up
Role : Master
Loader Version : 0.1.1.6
Linux Kernel Version : 2.6.19
Operation Code Version : 1.2.0.4
To Next Page
Loading...
Need help?
General