Chapter 4
| System Management Commands
Time
– 144 –
b-date - Day of the month when summer time will begin. (Range: 1-31)
b-month - The month when summer time will begin. (Options:
january
|
february
|
march
|
april
|
may
|
june
|
july
|
august
|
september
|
october
|
november
|
december
)
b-year- The year summer time will begin.
b-hour - The hour summer time will begin. (Range: 0-23 hours)
b-minute - The minute summer time will begin. (Range: 0-59 minutes)
e-date - Day of the month when summer time will end. (Range: 1-31)
e-month - The month when summer time will end. (Options:
january
|
february
|
march
|
april
|
may
|
june
|
july
|
august
|
september
|
october
|
november
|
december
)
e-year - The year summer time will end.
e-hour - The hour summer time will end. (Range: 0-23 hours)
e-minute - The minute summer time will end. (Range: 0-59 minutes)
offset - Summer time offset from the regular time zone, in minutes.
(Range: 1-120 minutes)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
â—†
In some countries or regions, clocks are adjusted through the summer months
so that afternoons have more daylight and mornings have less. This is known as
Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted
forward one hour at the start of spring and then adjusted backward in autumn.
â—†
This command sets the summer-time time zone relative to the currently
configured time zone. To specify a time corresponding to your local time when
summer time is in effect, you must indicate the number of minutes your
summer-time time zone deviates from your regular time zone (that is, the
offset).
Example
The following example sets the 2014 Summer Time ahead by 60 minutes on March
9th and returns to normal time on November 2nd.
Console(config)#clock summer-time DEST date march 9 2014 01 59 november 2
2014 01 59 60
Console(config)#
To Next Page
Loading...
Need help?
General