Epson Stylus Pro 10000 - Paper Set Lever Removal

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 121
4.3.1.2 Paper Set Lever Removal
1. Lift up the Paper Set Lever to the released position.
2. Remove two screws (CBP: M4 x 10) and remove the Pressure Lever Knob.
Figure 4-7.
3. Remove three screws (CBP: M4 x 10) securing the Roll Side R Cover and remove
the R Guide Cover.
Figure 4-8.
4. Remove a E ring securing the Paper Set Lever to the axis.
Figure 4-9.
5. Sliding the axis to the left and remove Paper Set Lever.
Figure 4-10.
Screws
Pressure lever knob
Screws
Paper set lever
E ring
Axis
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com