Epson Stylus Pro 10000 - Update Parameter

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Adjustment 365
8.3.1.5 Update parameter
Update the adjustment parameter.
Figure 8-11 showing the update parameter menu sequence.
Figure 8-11. Update parameter menu sequence
Print position
Performs updating of parameters for Bi-D printing position alignment and head gap
position alignment in PG small.
Figure 8-12 showing the print position menu sequence.
Item
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Enter
Update : Cap Position
Update : Head Rank
Update : PrintPos. Adj.
Update : Paper Feed Len.
Update : Mech. parameter
Update : Ink Parameter
Update cap position
Pause
Update End
Item
SelecType
Update : PrintPos. Adj. 2
Item
Item
Item
Item
Item
Item
Item
Item
SelecType
BiD 240, V1, K 0
BiD 240, V1, C 0
BiD 240, V1, M 0
BiD 240, V1, LC 0
BiD 240, V1, LM 0
BiD 240, V1, Y 0
BiD V2, K 0
12 3 4
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com