Epson Stylus Pro 10000 - B123 Slant Adjustment

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 234
5.4.4.9 B123 slant adjustment
Print the test pattern and make sure the print quality by referencing the Figure 5-60. If
the slant condition is presented, perform the mechanical adjustment.
This test using B1, B2 and B3 nozzle.
Figure 5-59 showing menu sequence.
Figure 5-59.
<Print sample>
1. Check items: Cyan lines, Light Magenta lines and Yellow lines are continue as
same level by a magnifying glass with scale.
2. Printing method.
 One pass with Uni-D at 360dpi resolution for CR and 45dpi for PF.
Figure 5-60.
Item
SelecType
SelecType
Enter
Printing Pattern
Adjust the slant?
Wait a moment
Wait a moment
End with "Pause" key.
B123 Slant Check End
Output Pattern
Shift to "B123 Slant Check End"
menu by pressing "Pause" key.
Shift to "Bi-D" adjustment or
"B123" slant check menu with
following key operation.
"Enter" key : Bi-D adjustment.
"Pause" key : B123 slant check.
Shift to"B123" slant check menu with
"Pause" key.
Print out the pattern with "Enter"
key.
Print END
CR movement END
Pause
CR movement END
C
LM Y YLMC
When check the slant, regard the
joint department shown here.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com