Epson Stylus Pro 10000 - Printer Setting Menu

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description SelecType Settings 36
1.6.1 Printer Setting Menu
NOTE: * The printed image is the same size whether the margin is 15mm or
3mm. The difference is 12mm of paper clearance is added to the top and
bottom edges to make paper feeding more stable and to prevent the paper
from rubbing the printheads.
NOTE: Underlined values are the default settings.
PLATEN GAP
Selecting this mode allows the user to set the platen gap. The relationship between
panel setting, command setting (SN command), and actual platen gap position is
shown below.
PAGE LINES
Selecting this mode allows the user to set the page line print mode. Setup is the
same as horizontal lines ON command (AC 02H 00H 00H 02H) with automatic
cutting setup. The solid line type is used.
Table 1-29. Printer Setting Menu
Display Message Options Notes
PLATEN GAP
Auto
,
Wide, Narrow
Adjusts the platen gap. (Normally, leave set to
Auto.)
PAGE LINE
ON
OFF
When Auto Cut Off is selected on the operating
Panel, this setting determines whether a line for
manual cutting is printed.
INTERFACE
Auto
, Parallel, USB,
Option1, Option2
Determines which interface the printer checks
for data. Auto continuously checks all interfaces
and is good for normal use.
CODE PAGE
PC437
PC850
Character code setting. (PC437: expanded
graphics/PC850: multi-lingual)
ROLL MARG
T/B 15MM
15MM
3MM
Roll sheet margin setting.
• Top/Bottom 15mm*
top and bottom margins = 15mm
left and right margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
PAPER SIZE CHK
ON
OFF
Determines whether the paper size check is
enabled
PAPER ALIGN CHK
ON
OFF
Determines whether the paper skew check is
enabled
INIT. PANEL EXEC.
Initializes operating Panel setup values to their
defaults
Table 1-30.
Paper
thickness
detector
Panel setup
SN
command
Actual PG
position
Gap
width
Application
Thin paper
Wide
PG Middle
Wide 2.7mm Thick paper
Medium 2.2mm
Reduce the smearing on the
printed image of thin paper.
Automatic
Wide 2.7mm Thick paper
Medium 2.2mm
Reduce the smearing on the
printed image of thin paper.
Automatic
PG Middle
Wide 2.7mm Thick paper
Medium 2.2mm
Reduce the smearing on the
printed image of thin paper.
Automatic
Wide 2.7mm Thick paper
Narrow 1.3mm Thin paper
Narrow
PG Middle
Wide 2.7mm Thick paper
Narrow 1.3mm Thin paper
Automatic
Wide 2.7mm Thick paper
Narrow 1.3mm Thin paper
Thick paper - - Wide 2.7mm Thick paper
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com