Epson Stylus Pro 10000 - Maintenance Mode 1

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 331
8.1.2.3 Maintenance Mode 1
Maintenance Mode 1 is entered, operated and terminated by same methods used with the Stylus Pro 10000/10000CF. (Refer to 1.7 "Maintenance Mode 1")
 Table 8-18 shown the Maintenance Mode 1 setup items.
C A U T I O N
The following explanations regarding operating Panel service
functions are for service and support purposes only; do not share
this information with the user.
Table 8-18. Maintenance Mode 1 Setup Items
Item Panel Display Item Menu 1 Panel Display Item Menu 2 Panel Display Setup Values
Print hexadecimal
dump
HEX DUMP
- - - HEX MODE *1
PRINT *2
Panel display
language select
LANGUAGE
- - - -
ENGLISH, FRENCH, ITALIAN,
GERMAN, SPANISH, PORTUGUE
Units change UNITS
----
METRIC, FEET/INCHES
Parallel interface
mode
PARA. I/F
- - - -
ECP, COMPAT
Set IEEE1284.4 IEEE1284.4
----
OFF
, ON
Internal job setup *2 INTERNAL JOB CT
- - - -
ON, OFF
Auto nozzle check
setup
AUTO NZL.CHK.
----
ON
, OFF
Supersonic cleaning
*3
SSCL B/C
- - - -
EXEC
SSCL LC/LM
----
EXEC
SSCL M/Y
- - - -
EXEC
Set MW7 mode MW7
----
A
, B, C
MW7mode balance MW7 BALANCE
- - - -
-30 ~ 0 ~ +30
Set selectable MW1 MW1 SELECT
----
1
, 2, 3, 4, 5, 6, 7, 8
Set selectable M/W2 MW2 SELECT
- - - -
1, 2, 3, 5, 6
Auto nozzle check
AUTO NOZZLE
CHK
----
ON, OFF
Default panel display DEFAULT PANEL
- - - -
EXEC
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com