Epson Stylus Pro 10000 - Cutter Replacement Menu

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description SelecType Settings 43
1.6.5 Cutter Replacement Menu
This mode is used to replace the cutter and clear the cutter life counter. The setting
method is shown below.
1. Select the cutter replacement menus from the panel.
(The cutter replacement menu can be selected with pushing SelecType button for 5
sec.)
2. Open the cover on the guide.
3. Replace the cutter blade following the guide.
4. Close the cover on the guide. (Cutter life monitor is automatically cleared.)
Table 1-42. Cutter Replace Menu
Items LCD panel display Values
Replace cutter CUT. REPLACE
EXEC.
Cover open guide OPEN LOWER COVER
-
Cutter replacement guide REPLACE CUTTER
-
Cover close guide CLOSE LOWER COVER
-
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com