Epson Stylus Pro 10000 - HJFK; Dummy Board Removal

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 134
4.3.2.2 HJFK / Dummy Board Removal
(Any of the HJFK board or the Dummy board of the option are fixed.)
1. Remove the Optional Interface Cover of rear as described in 4.3.1.7 "Rear Cover
Removal".
Figure 4-44.
2. Remove one screw (CS: M3 x 6) securing the HJFK board then remove the HJFK
/ Dummy board.
Figure 4-45.
3. Remove four screws (M3), then the board and the bracket are separated.
Figure 4-46.
HJFK / Dummy
board
Screw
Screws
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com