Epson Stylus Pro 10000 - L Side Cover Removal

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 124
4.3.1.5 L Side Cover Removal
1. Remove the H Top Cover as described in 4.3.1.3 "H Top Cover Removal".
2. Remove rear side two white screws (CS: M4x8).
Figure 4-16.
3. Remove left side three white screws (CS: M4x8).
Figure 4-17.
4. From the inside, remove two black screws (CS: M4x8).
Figure 4-18.
5. Slide the L Side Cover to the left and remove it.
Screws
Screws
Screws
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com