Epson Stylus Pro 10000 - Printable Area

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Specifications 13
1.2.4.3 Printable area
The list and figure shown below.
The printer detects paper width when paper is set. (If Set paper width detection is OFF, it doesn’t
detect paper width.)
It doesn’t print the image beyond printable area specified with paper size setting or paper width
detection. (It may print on the platen if Set paper width detection is OFF.)
Margins of roll paper can be changed with the panel as following;
Top/bottom 15mm, left/right 3mm
Top/bottom/left/right 3mm
Top/bottom/left/right 15mm
Figure 1-1. Printable Area
Table 1-7.
Heading Roll Paper Cut Sheets
PW (width) 210 ~1118mm 210 ~ 1118mm
PL (length) Max. 202m 279~1580mm
LM (left margin) 3mm/15mm*1 3mm
RM(Right lmargin) 3mm/15mm*1 3mm
TM (top margin) 3mm/15mm*1 3mm
BM (bottom) 3mm/15mm*1 14mm
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com